HEAT TRANSFER ENHANCEMENT BY USING TWO NANOPARTICLE BASE FLUIDS IN FORCED CONVECTION FLOWS

dc.contributor.author	BOUKERMA, K
dc.contributor.author	KADJA, M
dc.date.accessioned	2022-05-30T10:06:13Z
dc.date.available	2022-05-30T10:06:13Z
dc.date.issued	2016-10-31
dc.identifier.uri	http://depot.umc.edu.dz/handle/123456789/12471
dc.description.abstract	In the present paper, forced laminar flow of Al2O3/water and Al2O3/Ethylene Glycol (EG) nanofluids inside the tube (heated partially and uniformly) were numerically investigated by using single phase method. The effects of nanoparticles concentrations (0 - 5%) and base fluids are investigated on the flow and the convective heat transfer behaviour. The results obtained by the FLUENT software show that the enhancement in heat transfer is considerable when there are the nanoparticles in the base fluid. The wall temperature decreases with the increase in nanoparticles concentration, indicating that the heat transfer coefficient increases by increasing the concentration of nanoparticles in nanofluids. The Al2O3/Ethylene Glycol nanofluid has the highest Nusselt number than Al2O3/water nanofluid
dc.language.iso	en
dc.publisher	Université Frères Mentouri - Constantine 1
dc.subject	Numerical Simulation
dc.subject	Nanofluids
dc.subject	Forced Convection
dc.subject	Laminar Flow
dc.subject	Heat Transfer Augmentation
dc.title	HEAT TRANSFER ENHANCEMENT BY USING TWO NANOPARTICLE BASE FLUIDS IN FORCED CONVECTION FLOWS
dc.type	Article