Recently added

Contribution à l’étude d’un système de pompage photovoltaïque

Bounechba, Hadjer; Bouzid, Aissa (Université Frères Mentouri - Constantine 1, 2017-05-25)

This work concerns the contribution to the study of a photovoltaic pumping system. The main objective of this thesis is to improve the performance and the efficiency of a photovoltaic system through the use of an efficient ...

Modelisation et optimisation de systemes de production d'energies renouvelables couples au reseau

Benalla Hocine; Makhlouf Messaoud (Université Frères Mentouri - Constantine 1, 2017-01-01)

Modelisation et simulation d’une chaine de conversion Eolienne

Kerdoun Djallel; Boumassata Abderraouf (Université Frères Mentouri - Constantine 1, 2017-01-01)

The objective of this thesis consists for realizing a wind energy conversion system with a good compromise between cost, energy efficiency, system performance and quality of energy supplied to the grid. To achieve this ...

Répartition optimale des puissances utilisant les techniques de l’intelligence artificielle

Draidi, Abdellah; Labed, Djamel (Université Frères Mentouri - Constantine 1, 2016-07-11)

Power grids have been developing following the development of computer systems and control software, today we are interested in smart grids. The introduction of artificial intelligence techniques in the control and the ...

Etude de l’influence des paramètres géométriques et de contrôle sur les performances des MRV cylindriques

Bentounsi Ammar; Rebahi Fares (Université Frères Mentouri - Constantine 1, 2017-01-01)

With advances in the fields of power electronics, control, magnetic materials, models and simulation software, and its many advantages (simple construction and robust, reliability, performance, cost, ...), the switched ...

Performances comparées de machines synchrones à aimants permanents et à réluctance variable associées à une chaine de conversion d'energie renouvelable

Lebsir Abdelkadir; Bentounsi Ammar; Benbouzid Mohamed (Université Frères Mentouri - Constantine 1, 2017-01-01)

This thesis aims to: study, design and comparison of innovative generators adapted to the conversion of renewable energies, especially wind power in a direct drive. From a power (1.5 MW) and speed (1.55 rad / s) data given, ...

Elaboration de modèles électromagnétiques caractérisant le contrôle non destructif par courant de Foucault

Zerguini Sakina; Latreche Mohamed El Hadi (Université Frères Mentouri - Constantine 1, 2017-01-01)

Amélioration des performances des energies eoliennes

Khezzar Abdelmalek; Hacil Mahieddine (Université Frères Mentouri - Constantine 1, 2017-01-01)

Centrale eolienne et qualite de l’energie electrique

Benalla Hocine; Kendouli Fairouz (Université Frères Mentouri - Constantine 1, 2017-01-01)

Amélioration des performances des aérogénérateurs

Bouzid Aissa; Hamdi Naouel (Université Frères Mentouri - Constantine 1, 2017-01-01)

coordination de systemes de protection appliquee au reseau national

Bouzid A.; Bouchahdane Mohamed (Université Frères Mentouri - Constantine 1, 2017-01-01)

Contribution à l'étude de la machine asynchrone double étoile.

Maouche Yacine; Khezzar Abdelmalek (Université Frères Mentouri - Constantine 1, 2015-01-01)

Etude et optimisation d’un multi systeme hybride de conversion d’energie electrique

Borni Abdelhalim; Chenni Rachid (Université Frères Mentouri - Constantine 1, 2017-01-01)

This thesis deals with the application of hybrid output connected to the grid which are composed of a wind turbine, a photovoltaic source, and a unit for a fuel cell for energy continuity. A simple and cost control with ...

Techniques de commande avancées de la machine asynchrone

Rezgui Salah Eddine; Benalla Hocine (Université Frères Mentouri - Constantine 1, 2016-01-01)

The aim of this work was carried on the experimental comparison of the performance of field oriented vector control and DTC control, and to develop control and observation algorithms with conjoint on-line estimation of the ...

Contrôle optimal d’une chaine de conversion d’énergie utilisant des générateurs innovants associes à des convertisseurs statiques

Benalla Hocine; Messai Feyrouz (Université Frères Mentouri - Constantine 1, 2012-01-01)

This work focuses on the study of the switched reluctance generator of his behaviour and optimize its performance. The goal is to model a double salient SRM 6/4 and 6/8 associated with two converters: asymmetric half-bridge ...

"Contribution à la modélisation et à la commande de la machine asynchrone"

Khezzar Abdelmalek; Babaa Fatima (Université Frères Mentouri - Constantine 1, 2016-01-01)

Contribution à l’optimisation d’une chaine de conversion d’énergie photovoltaïque

Bouzid Aissa; Amarouayache Mohamed (Université Frères Mentouri - Constantine 1, 2017-01-01)

This work focuses on the optimization of photovoltaic MPPT chain, this axis is an important flaws in this field. For this we proposed a new approach MPPT and make a comparison with other approaches known in the literature. ...

Etude 3D d’un procédé de séparation magnétique dans les liquides en ecoulement

Belounis, Abdallah; Mehasni, Rabia; Feliachi, Mouloud (Université Frères Mentouri - Constantine 1, 2016-09-20)

This work presents a contribution to the study of the problems of the magnetic separation. It is a 3D study of the existing magnetic, hydraulic and particle dynamic phenomena, the conception and the realization of a prototype ...

Mchine synchrone à aimants permanents(MSAP)

Merzoug Mohamed Salah; Benalla Hocine (Université Frères Mentouri - Constantine 1, 2012-01-01)

Étude & simulation des modèles électrodynamiques par la méthode FDTD

Boukelkoul Lahcene; Leulmi Salah; Benalla Hocine (Université Frères Mentouri - Constantine 1, 2010-01-01)

Recently added

Electrotechnique: Recent submissions

Search DSpace

Browse

All of DSpace

This Community

My Account