Abstract:
We report on alumina thin films growth from α-Al2O3 target by pulsed laser
deposition. The alumina plasma was induced by a KrF laser beam at a wavelength of 248 nm
and pulse duration of 25 ns. The laser fluence was set to 10 J/cm2 and the oxygen pressure
was varying from 0.01 to 0.05 mbar. The effects of ambient pressure and substrate
temperature on the structure of the Al2O3 films are systematically investigated. X-Ray
diffraction (XRD) and scanning electron microscopy (SEM) were used for the phase and
structural analysis and the morphology of the films respectively. With XRD, the results
showed that the films are amorphous when the substrate temperature is less than 550°C.
For substrate temperature of 585°C, oriented Al is obtained. Whereas for temperature
between 688 °C and 760 °C a γ-Al2O3 structure is crystallized under oxygen pressure of 0.01
and 0.02 mbar. However amorphous films are obtained for higher substrate temperature
(772°C) where oxygen pressure is greater than 0.05 mbar. The SEM analysis shows a
relatively smooth and dense surface
